Zoom MS-90LP Multistomp Looper Pedal

Specs Number of memories 100 Sampling frequency 44.1 kHz Signal processing 32-bit float Number of recording and playback tracks 1 Data format WAV (44.1 kHz, stereo, 32-bit floating point) Maximum recording times 90 minutes (1 loop) / 13 hours or more (total for all memories) Frequency response 20 Hz – 20 kHz (+0.5 dB/-0.5 dB) (when 10k load) Display 160×128 dot-matrix LCD with color backlight Inputs L/R Standard mono phone jacks Rated input level: -20 dBu Input impedance (line): 470 k Outputs L/R Standard mono phone jacks Maximum output level: +7.2 dBu (when output impedance 10 k or higher) MIDI IN/OUT jacks Stereo mini jack Input S/N 122 dB Noise floor (residual noise) -100 dBu Power AC adapter 9V DC 500mA center negative (ZOOM AD-16) 2 AA batteries Alkaline, Lithium or Rechargeable NiMH batteries USB bus power is supported. Estimated operation times using batteries Alkaline batteries About 4.0 hours (about 3.5 hours using stereo input) NiMH batteries (1900 mAh) About 5 hours (about 4.5 hours using stereo input) Lithium batteries About 9 hours (about 8 hours using “stereo input) These values are approximate. Battery operation times were determined using in-house testing methods. They will vary greatly according to use conditions. USB Port USB 2.0 Type-C Supported cable type Type-C USB MIDI USB1.1 Full Speed File transfer USB 2.0 High Speed Use a USB cable that supports data transfer. Dimensions 133 mm (D) x 79 mm (W) x 61 mm (H) Weight 367 g (excluding batteries) 414 g (including batteries) Note: 0 dBu = 0.775 V